VRW  PUBLICATIONS          HOME   |   BOOKS  |   SERVICE DATA   |   RESTORATION   |   RADIO HISTORY

 

BB503 BATTERY DECAL   WOOD   BAKELITE    CHASSIS    ETHICS    PROJECTS    BATTERY DECALS

 

PLEASE NOTE: the sizes given are for guidance but anyone contemplating the assembly of one of these patterns must check dimensions carefully. No responsibility will be accepted for scaling errors.

 

 

 

 

 These excellent scans were provided for me by Bill Morris, otherwise known as BATTERYMAKER. Bill offers a service for battery receiver owners by constructing 'rebuildable' batteries to order. These are very well built items and really look the part. Best of all they can be refilled with modern batteries once exhausted!

Email Bill on batterymaker@gmail.com for further details, or take a look at his work on YouTube: watch-v=GTDwFxI71L8

 

IMPORTANT - please read before printing

The scans should be printed out to form a box of approximately 200mm X 140mm X 77mm. The length of 297mm given on the two large 'face' and 'back' scans includes the pasting flaps, so these two can be printed full-scale along the length of an A4 sheet. The remaining end and narrow-side scans need their print settings adjusting to fit. You are therefore advised to make up a trial box and test it in your radio for accuracy of fit before expending time and effort in the production of a neatly-built box that is fractionally too deep or wide to place in your radio.

 

VINTAGE RADIO world: SIXTEEN YEARS OF WEB PRESENCE